COMMUNITY

The best PAINTBALL destination around!
Welcome to #1 Paintball Sign in | Join | Help
in Search
Welcome to the #1 Paintball Message Forum. Please take the time to register as only registered users may post on this forum. Please take the time to read the FAQ in the General section regarding general forum rules as well as any stickies in each section for section specific rules.

Nitrogen on Tippmann?

Last post 06-04-2008, 8:50 AM by K-Dizzle. 6 replies.
Sort Posts: Previous Next
  •  04-24-2008, 4:01 PM 1352

    Nitrogen on Tippmann?

    I have a Tippmann 98 custom and a friend said that I should get Nitrogen for it and wasn't sure if it works with my marker. Does it?



  •  04-25-2008, 12:51 PM 1361 in reply to 1352

    Re: Nitrogen on Tippmann?

    It absolutely works. Also, technically, you'll be using compressed air, not nitrogen. You can get nitrogen fills rarely, but compressed air (called HPA for High Pressure Air) is easier, cheaper, more readily available and, since air is mostly nitrogen anyway, does the same thing.

    You'll notice more consistency between hot and cold weather as HPA isn't affected by ambient temperature nearly as much as CO2 is. HPA is far preferable in fall, winter and spring because CO2 just doesn't expand as well in cold weather. Summer doesn't matter.

    Another nifty thing about HPA is you never get liquid in your gun like you can (and often do) with CO2. That saves wear and tear on o-rings and other internals.

    All Tippmann guns are HPA ready right out of the box. 98's, 98 Customs, A-5's and X-7's all are ready to go with HPA when you buy them.

    What's the catch? The HPA tank's cost. Whereas you can get a CO2 cylinder for around $25 (give or take a 5-spot) an HPA tank like mine (4500psi - 68ci) will cost you between $175 and $250 depending on vendor, and whether it was bought in a store or on-line. My tank is carbon fiber, the lightest kind. You can get a steel tank for a LOT less, but it's heavy. Real heavy. Aluminum tanks are the "tweener". Lighter than steel, heavier than carbon fiber. More expensive than steel, less costly than carbon fiber.

    These tanks all come with a regulator on them. All you need to do is screw the tank onto your ASA connector on your gun, or hook it up to your remote line, whichever you have.

    I played one scenario with CO2. I've been using HPA for the next 9. It's money well spent if you are serious about playing paintball. If, however, you are just playing around and occasionally running rec-ball (which is what many, many people do), then stick to CO2. At that level of play it's not worth the cash outlay.

    There's my two cents. I hope I've been helpful.

     

    Woodman out


    Proud member of Team Black List

    "The society that separates its Warriors from its Scholars will have its decisions made by cowards and its battles fought by fools."
    Thucydides
  •  04-29-2008, 4:45 PM 1370 in reply to 1361

    Re: Nitrogen on Tippmann?

    thanks for the response



  •  06-02-2008, 8:42 PM 1443 in reply to 1370

    Re: Nitrogen on Tippmann?

    OOOOOO! Who told you that??? lol
  •  06-03-2008, 10:43 AM 1446 in reply to 1443

    Re: Nitrogen on Tippmann?

    not you, tyler did.

  •  06-03-2008, 4:59 PM 1448 in reply to 1446

    Re: Nitrogen on Tippmann?

    about 1 year ago i had a tippmann 98 with a two piece barrel i borrowd my firends nitro and well...... it broke my two peice barrle so if u have a two peice try not to use it
    FIGHT the devil WIN for JESUS

    !!!thats how u do it!!!!
  •  06-04-2008, 8:50 AM 1454 in reply to 1448

    Re: Nitrogen on Tippmann?

    ok, I'm tryin to sell mine anyway. This is an old post.



View as RSS news feed in XML
Thanks for stopping by our message forum. Stop by often to keep up with the latest news and happenings at #1 Paintball Corporation.